Info : Cuando hace clic en un enlace PDF en una página web, se puede abrir en el navegador web o directamente en Acrobat o Reader. Cada navegador tiene su propia configuración para controlar cómo se abren los archivos PDF desde una página web.
Ayuda: Cómo visualizar un PDF en su navegador antes de descargarlo:
Enlace a adobe.com para obtener ayuda en esta área.
Coeficiente de transmisión de vapor de agua de las telas espejo
Clasificación de reacción al fuego NEWMAT de los acabados mate, satinado, lacado y translucido
Certificado CE de la constancia del rendimiento
Marca CE de las telas NEWMAT, NEW/ACOUSTIC, NEW /LIGHT, NEW/BIOPRUF y NEW/MESH.
All our PVC membranes are CE-marked, with different classifications. Please consult our PVC line to check the classification of each reference. Please do not hesitate to contact us directly for further information.
All our PVC membranes are CE-marked, with different classifications. Please consult our PVC line to check the classification of each reference. Please do not hesitate to contact us directly for further information.
Modified AC 171 / Performance Evaluation of Sprinkler Heads in Full Scale Room Construction
Purpose of Modified AC 171
The purpose of this test was to evaluate the performance of a stretch ceiling sample in a 15′ X 15′ X 18′ room construction when a standard 1ft2 ceramic
burner heats the room, and to assess the performance of sprinkler heads in relation to the ceiling material.
The purpose of this test was to evaluate the performance of a stretch ceiling sample in a 15′ X 15′ X 18′ room construction when a standard 1ft2 ceramic
burner heats the room, and to assess the performance of sprinkler heads in relation to the ceiling material.
ASTM D635-98 / Rate of Burning PVC Profiles / Extrusions
(ASTM D635-98 is the Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position)
ASTM D4216-98 / Izod Impact and Tensile Strength of PVC Profiles / Extrusions
(Izod Impact, Tensile Strength & Modulus, Deflection Temperature under Flexural load and Coefficient of linear Expansion in accordance with the procedure outlined in ASTM D4216-98)
ASTM D4226-00 / Impact Test on PVC Extrusion
(Reference ASTM D4226-00, 23 drops of an 8 lb. load onto a steel impactor head with a 0.125 inch radius.)
ASTM E84-13a / Newmat Clip
(The purpose of this test method is to determine the relative burning behavior of the material by observing the flame spread along the specimen. Flame Spread and Smoke Developed index are reported. However, there is not necessarily a relationship between these two measurements)
ASTM E84-13a / PVDF Fabric Panel Assembly
(Perform standard flame spread and smoke density developed classification tests on the sample supplied in accordance with ASTM Designation E84-13a, Standard Method of Test for Surface Burning Characteristics of Building Materials. The foregoing test procedure is comparable to UL 723, ANSI/NFPA No. 255, and UBC No. 8-1.)
ASTM E84 / Designer Finish
(The purpose of this test method is to determine the relative burning behavior of the material by observing the flame spread along the specimen. Flame Spread and Smoke Developed index are reported. However, there is not necessarily a relationship between these two measurements)
ASTM E84 / Glass Fiber Fabric
(The purpose of this test method is to determine the relative burning behavior of the material by observing the flame spread along the specimen. Flame Spread and Smoke Developed index are reported. However, there is not necessarily a relationship between these two measurements)
ASTM E84 / Grey Metallic Finish (Revised)
(Perform standard flame spread and smoke density developed classification tests on the sample supplied by the Client in accordance with ASTM Designation E84-12, (Standard Method of Test for Surface Burning Characteristics of Building Materials). The foregoing test procedure is comparable to UL 723, ANSI/NFPA No. 255, and UBC No. 8-1.)
ASTM E84 / Lacquer Finish
(The purpose of this test method is to determine the relative burning behavior of the material by observing the flame spread along the specimen. Flame Spread and Smoke Developed index are reported. However, there is not necessarily a relationship between these two measurements)
ASTM E84 / Marble Finish
(The purpose of this test method is to determine the relative burning behavior of the material by observing the flame spread along the specimen. Flame Spread and Smoke Developed index are reported. However, there is not necessarily a relationship between these two measurements)
ASTM E84 / Matte Finish
(The purpose of this test method is to determine the relative burning behavior of the material by observing the flame spread along the specimen. Flame Spread and Smoke Developed index are reported. However, there is not necessarily a relationship between these two measurements)
ASTM E84 / Mesh Finish
(The purpose of this test method is to determine the relative burning behavior of the material by observing the flame spread along the specimen. Flame Spread and Smoke Developed index are reported. However, there is not necessarily a relationship between these two measurements)
ASTM E-84 / Newmat NEW/MIRODAL Panel
(Perform standard flame spread and smoke density developed classification tests on the sample supplied by the Client in accordance with ASTM Designation E84-15, « Standard Method of Test for Surface Burning Characteristics of Building Materials ». The foregoing test procedure is comparable to UL 723, ANSI/NFPA No. 255, and UBC No. 8-1)
ASTM-E84 – NEW/MIRODAL – Mirror-Panel
Standard flame spread and smoke density developed classification tests on NEWMAT NEW/MIRODAL MIRROR PANEL in accordance with ASTM Designation E84-15, « Standard Method of Test for Surface Burning Characteristics of Building Materials ».
The foregoing test procedure is comparable to UL 723, ANSI/NFPA No. 255, and UBC No. 8-1.
Material resulted in a class “A”. Detailed test results are presented in the PDF report
ASTM E84 / Satin Finish
(The purpose of this test method is to determine the relative burning behavior of the material by observing the flame spread along the specimen. Flame Spread and Smoke Developed index are reported. However, there is not necessarily a relationship between these two measurements)
ASTM E84 / Translucent Finish
(The purpose of this test method is to determine the relative burning behavior of the material by observing the flame spread along the specimen. Flame Spread and Smoke Developed index are reported. However, there is not necessarily a relationship between these two measurements)
ASTM E84 / White Lacquer LX01
Perform standard flame spread and smoke density developed classification tests on the sample supplied by the Client in accordance with ASTM E84 – 18b « Standard Method of Test for Surface Burning Characteristics of Building Materials ». The foregoing test procedure is comparable to UL 723, ANSI/NFPA No. 255, and UBC No. 8-1. Preparation and Mounting was conducted in accordance to ASTM E2573-17 « Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics ».
ASTM E84 / White Matte MX02
Perform standard flame spread and smoke density developed classification tests on the sample supplied by the Client in accordance with ASTM E84 – 18b « Standard Method of Test for Surface Burning Characteristics of Building Materials ». The foregoing test procedure is comparable to UL 723, ANSI/NFPA No. 255, and UBC No. 8-1. Preparation and Mounting was conducted in accordance to ASTM E2573-17 « Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics ».
ASTM E84 / White Satin SX03
Perform standard flame spread and smoke density developed classification tests on the sample supplied by the Client in accordance with ASTM E84 – 18b « Standard Method of Test for Surface Burning Characteristics of Building Materials ». The foregoing test procedure is comparable to UL 723, ANSI/NFPA No. 255, and UBC No. 8-1. Preparation and Mounting was conducted in accordance to ASTM E2573-17 « Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics ».
ASTM E84 / White Translucent TX04
Perform standard flame spread and smoke density developed classification tests on the sample supplied by the Client in accordance with ASTM E84 – 18b « Standard Method of Test for Surface Burning Characteristics of Building Materials ». The foregoing test procedure is comparable to UL 723, ANSI/NFPA No. 255, and UBC No. 8-1. Preparation and Mounting was conducted in accordance to ASTM E2573-17 « Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics ».
ASTM E84 / White Matte Finish (Revised)
(Perform standard flame spread and smoke density developed classification tests on the sample in accordance with ASTM Designation E84-12, (Standard Method of Test for Surface Burning Characteristics of Building Materials). The foregoing test procedure is comparable to UL 723, ANSI/NFPA No. 255, and UBC No. 8-1.)
ASTM E-84 White Translucent Wide Width
(The purpose of this test method is to determine the relative burning behavior of the material by observing the flame spread along the specimen. Flame Spread and Smoke Developed index are reported. However, there is not necessarily a relationship between these two measurements)
ASTM E84 / Wood Finish
(The purpose of this test method is to determine the relative burning behavior of the material by observing the flame spread along the specimen. Flame Spread and Smoke Developed index are reported. However, there is not necessarily a relationship between these two measurements)
ASTM-E84 07 / Acoustical Panel Assembly
(This report presents test results of Flame Spread and Smoke Developed Values per ASTM E-84-07. The report also includes Material Identification, Method of Preparation, Mounting and Conditioning
of the specimens.)
of the specimens.)
ASTM-E84 07 / Translucent Double-Layer Panel Assembly
(This report presents test results of Flame Spread and Smoke Developed Values per ASTM E-84-07. The report also includes Material Identification, Method of Preparation, Mounting and Conditioning
of the specimens.)
of the specimens.)
ASTM-E84 08a / Micro-perforated T7 / CRYSTAL clear membrane
(This report presents test results of Flame Spread and Smoke Developed Values per ASTM E-84-07.
The report also includes Material Identification, Method of Preparation, Mounting and Conditioning
of the specimens.)
The report also includes Material Identification, Method of Preparation, Mounting and Conditioning
of the specimens.)
ASTM-E84-13 / T11-Clear Frosted
(Perform standard flame spread and smoke density developed classification tests on the sample in accordance with ASTM Designation E84-12, (Standard Method of Test for Surface Burning Characteristics of Building Materials). The foregoing test procedure is comparable to UL 723, ANSI/NFPA No. 255, and UBC No. 8-1.)
ASTM-E84-14 / ACT08-Cristal Micro-Perforated
(Perform standard flame spread and smoke density developed classification tests on the sample in accordance with ASTM Designation E84-12, (Standard Method of Test for Surface Burning Characteristics of Building Materials). The foregoing test procedure is comparable to UL 723, ANSI/NFPA No. 255, and UBC No. 8-1.)
ASTM-E84-14 / ACT10-Clear Micro-Perforated
(Perform standard flame spread and smoke density developed classification tests on the sample in accordance with ASTM Designation E84-12, (Standard Method of Test for Surface Burning Characteristics of Building Materials). The foregoing test procedure is comparable to UL 723, ANSI/NFPA No. 255, and UBC No. 8-1.)
ASTM-E84-14 / ACT0B3M-Soft White Translucent Micro-Perforated
(Perform standard flame spread and smoke density developed classification tests on the sample in accordance with ASTM Designation E84-12, (Standard Method of Test for Surface Burning Characteristics of Building Materials). The foregoing test procedure is comparable to UL 723, ANSI/NFPA No. 255, and UBC No. 8-1.)
ASTM E136 / Evaluating the Behavior of Aluminum Profiles / Extrusions in Vertical Tube Furnace at 750 Degrees Celsius.
(ASTM E 136-99ε1 covers the performance of elementary building materials when exposed to 750°C (1382°F), to indicate those materials that do not act to aid combustion or add appreciable heat to an ambient fire.)
Bio-Pruf (BIO PRUF is a registered trademark by the company MORTON INTERNATIONAL in the USA and corresponds to a treatment product which is a US patent)
BIO PRUF is a powerful anti-germ, anti-fungal product impregnating the treated items (stretch ceilings NEWMAT BIO PRUF) Contrary to the running treatment in surface, that the action is limited in the time, BIO PRUF acts for the duration of life of the treated product in diffusing its active constituents.
Bodycote (Materials Testing Canada Inc.):
Surface Burning Characteristics of:
- “L1” Stretch Ceiling Fabric View / Download PDF
- “LM31” Stretch Ceiling Fabric View / Download PDF
- “LM63” Stretch Ceiling Fabric View / Download PDF
- “M15” Stretch Ceiling Fabric View / Download PDF
- “PL401” Stretch Ceiling Fabric View / Download PDF
- “S600” Stretch Ceiling Fabric View / Download PDF
CAN/ULC-S102.2 / M15 White Matte Membrane
CAN/ULC-S102.2 Surface Burning Characteristics of « M-15 Matte Finish » Stretch Ceiling Fabric
CAN/ULC-S102-T11 Clear Frosted Membrane
CAN/ULC-S102 Surface Burning Characteristics of « T11 Clear Frosted Membrane » Stretch Ceiling Fabric
CAN/ULC-S102-T0B3M Soft White Translucent Membrane
CAN/ULC-S102 Surface Burning Characteristics of « T0B3M Soft White Translucent Membrane » Stretch Ceiling Fabric
UL 723 / Surface Burning Characteristics of Translucent Membranes
In accordance with Standard ANSI/UL723, Tenth Edition, dated September 10, 2008, Test for Surface Burning Characteristics of Building Materials, (ASTM E84-11).
The test determines the Surface Burning Characteristics of the material, specifically the flame spread and smoke developed indices when exposed to fire.
Material Safety Data Sheet (MSDS)
Newmat Stretch Ceilings, including the following trade names/product lines:
Newmat, Newmat Perforated, NEW/ACOUSTIC, Newmat Graphic, NEW/LIGHT, Newmat Mesh, Mir.O.Dal, Bio-Pruf
Newmat, Newmat Perforated, NEW/ACOUSTIC, Newmat Graphic, NEW/LIGHT, Newmat Mesh, Mir.O.Dal, Bio-Pruf
MEA Approval
CITY OF NEW YORK DEPARTMENT OF BUILDINGS
Pursuant of Administrative Code Section 27-131, the following equipment or material has been found acceptable for use in accordance with the report of the Material and Equipment acceptance (MEA) Division.
Melting Point / Fisher John Method
The Purpose is to find the melting point of a submitted sample.
NFPA 286 / M15 white matte / Evaluation Contribution of Wall and Ceiling Interior Finish to Room Fire Growth
Flammability Testing to NFPA 286, Standard Methods of Fire Tests for Evaluating Contribution of Wall and Ceiling Interior Finish to Room Fire Growth – 2015 Edition.
NFPA 701 / Suede / Flame Propagation of DF9 / Suede Membrane
The requirements for acceptance of the NFPA 701 (Test Method 2) are:
- Where fragments or residues of specimens that fall to the floor of the test chamber continue to burn for more than 2 s, the material shall be recorded as failing the test.
- Where the char length exceeds 435 mm (17.1 in.) for flat specimens or 1050 mm (41.3 in.) for fold specimens, the material shall be recorded as failing the test.
- Where the afterflame exceeds 2 s, the material shall be recorded as failing the test.
- Where the specimens do not demonstrate performance in accordance with any of the conditions indicated in the above, the material shall be recorded as passing the test and shall be designated as flame resistant.
NFPA 701 / Translucent / Flame Propagation of T0B / Translucent Membrane
The requirements for acceptance of the NFPA 701 (Test Method 2) are:
- Where fragments or residues of specimens that fall to the floor of the test chamber continue to burn for more than 2 s, the material shall be recorded as failing the test.
- Where the char length exceeds 435 mm (17.1 in.) for flat specimens or 1050 mm (41.3 in.) for fold specimens, the material shall be recorded as failing the test.
- Where the afterflame exceeds 2 s, the material shall be recorded as failing the test.
- Where the specimens do not demonstrate performance in accordance with any of the conditions indicated in the above, the material shall be recorded as passing the test and shall be designated as flame resistant.
Self Ignition and Flash Ignition
Determine the ignition properties of the sample in accordance with the method and procedures outlined in ASTM D1929-96, Procedure B, “Ignition Properties of Plastics.”
UBC 801-2 / Material Behavior at 300 Degrees Fahrenheit for 25 Minutes on M15 Membrane with PVC and Aluminum Profiles
Criteria for passing is stated in the code as, “show that materials when cemented or otherwise fastened in place will not readily become detached when subject to room temperatures of 300° F (149 °C) for 25 minutes.” The frames were placed in an oven preheated to 300 °F (149 °C). After 25 minutes the frames were removed and examined.
UBC Standard 26-3 / Room Fire Test for TRM 15 White Matt Reinforced Membrane with Sprinkler Activation Study
CONDITIONS OF ACCEPTANCE
A foam plastic wall or ceiling assembly shall be considered as meeting the requirements for acceptable performance within the following conditions:
A foam plastic wall or ceiling assembly shall be considered as meeting the requirements for acceptable performance within the following conditions:
- Charring of the foam plastic shall not extend to the outer extremities of the test area within a 15-min period after ignition of the excelsior. Discoloration extending not more than 1/4 in.
(6 mm) into the foam plastic shall not be considered as charring. - Smoke levels generated during the test period shall not be excessive.
- Structural panels shall sustain the applied load during the test period.
UL 94 Horizontal Burning Material Test – T0B3M White Translucent
Three specimens are conditioned for at least 48 h at 23° ± 3 °C at 50 ± 5% relative humidity prior to testing. Each specimen is marked with two lines, 25 and 100 mm from one end of the specimen. The specimen is clamped at the end farthest from the 25-mm mark, with its longitudinal axis horizontal and its transverse axis inclined 45 ± 2 degrees. The mounted specimen is tested in a draft-free cabinet and the 25-mm Bunsen burner methane / air blue flame is applied at a 45-degree angle to the front edge of the specimen to a depth of approximately 6 mm for 30 s or until the specimen ignites and has burned to the 25-mm mark, whichever occurs first. The flame is then withdrawn away from the specimen and the rate of burning from the 25-mm mark to the 100-mm (4.0-in) mark is determined.
UL 94 Horizontal Burning Material Test – T10 Clear
Three specimens are conditioned for at least 48 h at 23° ± 3 °C at 50 ± 5% relative humidity prior to testing. Each specimen is marked with two lines, 25 and 100 mm from one end of the specimen. The specimen is clamped at the end farthest from the 25-mm mark, with its longitudinal axis horizontal and its transverse axis inclined 45° ± 2 degrees. The mounted specimen is tested in a draft-free cabinet and the 25-mm Bunsen burner methane / air blue flame is applied at a 45-degree angle to the front edge of the specimen to a depth of approximately 6 mm for 30 s or until the specimen ignites and has burned to the 25-mm mark, whichever occurs first. The flame is then withdrawn away from the specimen and the rate of burning from the 25-mm mark to the 100-mm (4.0-in) mark is determined.
UL 94 Thin Material Vertical Burning Test – T0B3M White Translucent
This test is intended to be performed on materials that due to their thinness, distort, shrink, and/or are consumed up to the holding clamp when tested using the test described in the 20-mm Vertical Burning Test; V-0, V-1, or V-2, Section 8. This test shall only be performed after it has been determined that the samples cannot meet the requirements of the 20-mm Vertical Burning Test. A test specimen with a thickness less than 0.025 mm shall not be subjected to the 20-mm Vertical Burning Test.
UL 94 Thin Material Vertical Burning Test – T10 Clear
This test is intended to be performed on materials that due to their thinness, distort, shrink, and/or are consumed up to the holding clamp when tested using the test described in the 20-mm Vertical Burning Test; V-0, V-1, or V-2, Section 8. This test shall only be performed after it has been determined that the samples cannot meet the requirements of the 20-mm Vertical Burning Test. A test specimen with a thickness less than 0.025 mm shall not be subjected to the 20-mm Vertical Burning Test.
UPitt / Toxicity Test of White Matt Membrane
INVESTIGATION OF THE TOXIC POTENCY OF THE COMBUSTION PRODUCTS OF NEWMAT STRETCH CEILING SYSTEMS IN ACCORDANCE WITH THE REQUIREMENTS OF THE CITY AND STATE OF NEW YORK
The intent of this testing was to evaluate the performance of the test article in relation to wood as required by Section 27-348(e) of the Building Code of the City of New York. The test procedure is a modification of the combustion toxicity protocol developed at the University of Pittsburgh (UPitt).
JEM PRODUCT BUILDER - ia & Automatisation 
Laisser un commentaire